Settings

The “Settings” tab (see Figure 1) manages the overall settings of the website (see Figure 1). This tab and the settings within this tab are meant to be used by advanced Authorized Users. If you have any questions regarding the “Settings”, contact the PageFramer system administrator. Otherwise, it is recommended to leave all of these setting at their default status.

Figure 1

If the Authorized User has authority to make changes and chooses to do so, the changes will only take effect once the “Update Settings” button has been selected. Again, it is best to leave these at their default setting.

Warning: Modifying settings in the settings tabs could cause the website to malfunction or stop working. Again, it is recommended that you contact the PageFramer System Administrator prior to making any changes to the "Settings" tab.

Note: Modifying settings in the settings tabs could cause the website to malfunction or stop working. Again, it is recommended that you contact the PageFramer System Administrator prior to making any changes to the Settings tab.

The "Site Info" tab contains the primary information about the site (see see Figure 2). This is the page developers use to set the critical settings of the site. Typical Authorized Users will not need to touch this page after the site has been launched.

Figure 2

Site Name

The "Site Name" field is a required field (see Figure 3). Authorized Users cannot make or save settings to the Site Info tab without providing a Site Name. The site name usually is the same as the name of the organization, business, or individual client for which the site was constructed.

Figure 3

Site Tag Line

In most cases, the "Site Tag Line" is not typically used on sites (see Figure 4). However, on those site where the Site Tag Line is used, this is the location where an Authorized Users would add/modify/delete the tag line.

Figure 4

Domain Name

After a site has been launched, this required field is rarely ever changed (see Figure 5).

Figure 5

Default Home Page

The "Default Home Page" is the "slug" of the page designated as the Home page of the website. The default is "home." (See Figure 6.)

Figure 6

Theme

This required field selects the "Theme" to be used for the website (see Figure 7). Again, this setting should not be modified unless there is a new theme for the website.

Figure 7

Theme Cache Time

The "Theme Cache Time" is related to the number of seconds (in thousands of a second) the site is to be cached on the server (see Figure 8). 

Figure 8 

Append Site Name to SEO Title

When the "Append Site Name to SEO Title" check box is selected the Site Name will be appended to the end of the "SEO Title" of each page (see Figure 9).

Figure 9

Use Breadcrumb

The "Use Breadcrumb" setting allows a navigation breadcrumb to be see on subpages of the website (as seen at the top of this page, just below the Navigation bar). (See Figure 10.) This setting is not commonly used on many websites and may also be disabled in the theme of a website. The best thing to do is leave this setting as is. 

Figure 10 

Show Last Modified

This setting allows users to see the last time a page was modified (as seen at the bottom of the content area of this page). (See Figure 11.) This setting may be disabled on some websites and is best left as it is currently set. 

Figure 11 

Global HTML Bottom

Global HTML Bottom (see Figure 12) setting is only available in PageFramer 4.4.3 and higher. This section is used to add custom code that needs to be used throughout the website. Common use of this section would be to add scripts for social media applications or a Google Analytics script (although it is recommended by Google to add analytic script(s) to the top of the page so they load prior to the page content). If you see code added to this section, the best practice is to leave it alone as well. 

Figure 12 

To save changes once they have been made, select the "Update Settings" button. Once saved, you will be taken back to the "Site Info" tab. 

The SSL Settings for a website can be modified on this tab. This will force the website to use https:// rather than http:// in the URL of the website (see Figure 13):

Figure 13

The setting can be modified by selecting or un-selecting the checkbox on this page. Once the setting has been modified, the "Update Settings" button must be selected for the change to occur. Once saved, you will be taken back to the "Site Info" tab.

Of all the tabs within the "Settings" section, the "Forms" tab (see Figure 14) is one you may need to update. Before you make any changes to this section, you should first make certain the "Forms Module" is enabled in the "Modules" section of the administration area. Otherwise, you may need to determine if your site is using MachForm to make forms on the site.

Figure 14

To Email

This field contains the email or emails where forms will be sent to once completed. Unless otherwise instructed, this should not be modified. (See Figure 15)

Figure 15

From Name

The "From Name" is the name of the organization, business, individual, or website from which the email is being sent. (See Figure 16)

Figure 16

From Email

The "From Email" is the email being used to send email from the server to the form User. (See Figure 17)

Figure 17

SMTP Host

By default, the SMTP Host is set to "localhost." This may be modified to an off-site SMTP server, such as Google's Gmail SMTP server as needed. (See Figure 18)

Figure 18

SMTP Username

The "SMTP Username" will be filled with the username of the email account used to send emails from the server. Modification of this setting may cause the recipients to no longer receive emails from this server. If set, it is not recommended to change this setting. (See Figure 19)

Figure 19

SMTP Password

The "SMTP Password" must be the password assigned to the SMTP Username. Again, this should not be modified unless the Username password has been changed. (See Figure 20)

Figure 20

To save changes once they have been made, the "Update Settings" button must be selected. Once saved, you will be taken back to the "Site Info" tab.

The "File Manager" tab (see Figure 21) is another tab you may need to update, but not very frequently. If you want to be able to upload an uncommon file type to the "File Manager" you will need to add the new file extension(s) to the end of the list. Separate the file extention types using a comma after each file extension type. It is not required to place a comma at the end of the last file extension.

Figure 21

To save changes once they have been made, select the "Update Settings" button. Once saved, you will be taken back to the "Site Info" tab.

The "Cache" tab can be used to modify the cache setting of the website (see Figure 22):

Figure 22

Cache Pages

If you wish for pages of the website to be cached for a specific period of time, select the "Cache Pages" checkbox (see Figure 23). 

Figure 23

Clear Cache

If you wish to clear the cache of the website pages, select the "Clear Cache" checkbox then proceed to select the "Update Settings" button. Once this is done, you will be directed back to the "Site Info" tab (see Figure 24).

Figure 24

Cache Expires (seconds)

This setting determines the length of time a webpage cache will expire (see Figure 25). This setting is set in seconds. The default is 1800 seconds (or 300 minutes).

Figure 25

Cache GC Expires (seconds)

[Needs explanation]  (see Figure 26)

Figure 26

Cache GC Probability (seconds)

[Needs Explination]  (see Figure 27)

Figure 27

To save changes once they have been made, select the "Update Settings" button. Once saved, you will be taken back to the "Site Info" tab. 

The "TinyMCE (WYSIWYG)" tab (see Figure 28) defines the parameters of the TinyMCE editor within the pages of the Content Manager TinyMCE editor.

Figure 28